Tiger Foam Surface Spray formula is a natural for air sealing spas and hot tubs, cold storage facilities, crawl spaces and basements and it is also E-84 Fire Rated for your protection. Just 1” of Tiger Foam Closed Cell Surface Spray Formula will help reduce heat loss and reduce moisture buildup. This product is safe around wiring and adds structural stability to your hot tub/spa.
It has been reported that by using the right spray foam techniques to fully air seal your hot tub or spa, your energy cost could be as little as $15/Month. “Full foam insulation consists of filling the area between the shell and cabinet sub floor completely with a thick layer of solid, rigid foam. Over 70% of hot tubs manufactured today use this method of insulation because it is an excellent way to insulate and support the hot tub shell. Full foam insulation will keep heating costs to a minimum whether you use the spa indoors or out.” – As stated by SpaSearch.org
Unless your Hot Tub or Spa is for more than 8 people, one TF-200 kit will complete the job. Simply apply a 1" layer of foam covering the entire shell.
If you have any questions about using Tiger Foam for your application, contact us toll-free at 1-888-844-3736.
Foam Kits - 200
bd. ft. Foam Kits (16 cu. ft.)
Item # TF200FR
Foam Kits - 600
bd. ft. Foam Kits (50 cu. ft.)
Item # TF600FR
Technical Information
Unless otherwise stated, the density of TIGER FOAM is 1.75 lbs. per cubic foot.
Tiger Foam two component foams are rated at R-Value of 6.2-7.4 per inch (depends on the external factors such as humidity and temperature during the application and curing).
The conversion to cubic foot yield for these kits is generally 600 yields 50 cubic feet and 200 yields 16 cubic feet of foam.
To convert gallons to cubic feet for filling liquid tanks with foam (for EPA membranes, flotation devises etc.), multiply gallons by 0.1337. So a 500 gallon tank would need 66.85 cu to fill the tank requiring a TF600SR and TF-200 for a total of 66 cu. yield.
Tiger Foam contains NO Penta-BDEs as a fire retardant and are both E-84 Fired Rated
You find complete technical information available in the Fast Rise Datasheet. For further questions, please contact us.
"
